1EA Roll-Up Door

The 1EA (1 inch Extruded Aluminum) door is suitable for smaller compartments or cabinets with minimal head room. The Slats are not sealed therefore the door is recommended for interior use or exterior use where there is limited exposure to the elements.

Features

  • Curtain - Constructed using single wall 0.854 inch (exposed surface) interlocking extruded aluminum slats. Slats are locked into position with nylon End Clips.
  • Bottom Rail - 2 inch extruded aluminum complete with or without a Finger Rail. A Bottom Seal can be added as an extra.
  • Side Guides/Track - Side Guides are 1" X 5/8" extruded aluminum U-channel.
  • Counterbalance - For Roller assisted operation, the Counterbalance consists of a 3/4" diameter hollow shaft, mill aluminum 3" tube, nylon cores, and an appropriately engineered/sized spring for the application.
  • Operation - Hand operated by lifting the Bottom Rail to open and pulling down the Bottom Rail to close the door.
  • Door Locking - Flush cylinder lock (key operated) or T handle (keyed or non-keyed).
  • Finish - Normal finish is a clear anodized finish. Slats can be provided in a mill finish for customer painting or, for an additional charge, entire door can be powder coated to customer specified color. Wet paint is also available at additional cost.

Technical Information

To discuss your requirements further, please visit our Contact Us page, and call or email the Dover Roller Shutters team.